Category:35HD-QUAD-NAS

From NAS-Central MRT Wiki
Jump to: navigation, search
This article is currently a stub. You can help this Wiki by expanding it

. This template will categorize articles that include it into Category:Stubs.

Quad HD NAS 1.jpg
35HD-QUAL-NAS
CPU ARM 9, 300MHz - StorLink SL3516
RAM 128MB
Flash ROM
Other Internal Power Supply
NIC 1000/100BASE-TX/10BASE-T
USB 1.1 (for Print server )
internal HDD BYOD 4x 3.5"
SATA/IDE Controller SATA
RAID Level JBOD, 0, 1, 5
Drive Capacity 6TB ( 4x1500GB )
Fan Evercool EC8025M12E

35HD-QUAD-NAS Announcement

Message from info@mrt-communication.com,

"Many thanks for inquiry and being interested in our Giga NAS.. Attached spec. & hi-res. picture for your study. The sample would be ready in the end of Feb. Would keep you informed. The roughly price US$160.0 FYI."

LCD Screen

Winstar WH1602D This is different than the one in most of the pictures you find on the internet of this product. http://www.winstar.com.tw/products_detail_ov.php?ProID=24

Bootloader Log

Firmware version G5S604120026302

 Storlink SL351x Boot Loader [Linux], version 1.1.3_P16M_RG08
 Built by linux, 13:56:04, Jun  6 2008
 Processor: SL3516c2
 CPU Rate: 300000000
 AHB Bus Clock:150MHz    Ratio:2/1
 
 LCD Detecting!!
 LCD FOUND!!
 ==> enter ^C to abort booting within 3 seconds ...... 
 Load Kern image from 0x30020000 to 0x1600000 size 3145728
 Load Ramdisk image from 0x30320000 to 0x800000 size 6291456
 Uncompressing Linux.................................................................................................................................
 done, booting the kernel.
 Linux version 2.6.15 (root@linux2) (gcc version 3.4.4) #137 Fri Oct 31 09:56:08 CST 2008
 CPU: FA526id(wb) [66015261] revision 1 (ARMv4)
 Machine: GeminiA
 Ignoring unrecognised tag 0x00000000
 Memory policy: ECC disabled, Data cache writeback
 CPU0: D VIVT write-back cache
 CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
 CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
 Built 1 zonelists
 Kernel command line: root=/dev/ram0 rw console=ttySL0,19200 initrd=0x00800000,16M ramdisk_size=16384
 PID hash table entries: 1024 (order: 10, 16384 bytes)
 Bus: 150MHz(2/1)
 sl2312 console setup : 
 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
 Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
 Memory: 128MB = 128MB total
 Memory: 108672KB available (3285K code, 1270K data, 104K init)
 Mount-cache hash table entries: 512
 *** Page_chain_cachep Init!***
 CPU: Testing write buffer coherency: ok
 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
 Freeing initrd memory: 16384K
 NET: Registered protocol family 16
 PCI: bus0: Fast back to back transfers disabled
 sl2312_pci_map_irq : slot = 0  pin = 1 
 SCSI subsystem initialized
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
 Initial RAID Descripter...
 XOR:tx_desc = ffc00000
 XOR:rx_desc = ffc01000
 XOR:tx_desc_dma = 01711000
 XOR:rx_desc_dma = 01712000
 NetWinder Floating Point Emulator V0.97 (double precision)
 VFS: Disk quotas dquot_6.5.1
 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 NTFS driver 2.1.25 [Flags: R/O].
 SGI XFS with ACLs, large block numbers, no debug enabled
 SGI XFS Quota Management subsystem
 Initializing Cryptographic API
 io scheduler noop registered
 io scheduler deadline registered
 Real Time Clock Driver v0.10
 Gemini Gpio init
 Register Gemini Power control
 Power event by Unknow Source 
 Storlink CIR Initialization
 Watchdog Timer Initialized
 Storm crypto Initialization
 ttySL0 at MMIO 0x42000000 (irq = 18) is a SL2312
 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
 loop: loaded (max 8 devices)
 PPP generic driver version 2.4.2
 PPP Deflate Compression module registered
 PPP BSD Compression module registered
 NET: Registered protocol family 24
 VSC-switch not found
 Storm Semiconductors,Inc. SL351x Giga Ethernet driver 0.1.7 built at Oct 31 2008 09:54:01
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 ide 0: physical = 63000000, virtual = c8800000, irq = 4
 ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
 ide 1: physical = 63400000, virtual = c8802000, irq = 5
 ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
 master not ready
 hdc: no response (status = 0x80), resetting drive
 hdc: no response (status = 0x80)
 SL2312 MTD Driver Init.......
 SL2312 CFI Flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
 number of CFI chips: 1
 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 Creating 7 MTD partitions on "SL2312 CFI Flash":
 0x00000000-0x00020000 : "RedBoot"
 0x00020000-0x00320000 : "Kernel"
 0x00320000-0x00920000 : "Ramdisk"
 0x00920000-0x00f20000 : "Application"
 0x00f20000-0x00f40000 : "VCTL"
 0x00f40000-0x00fe0000 : "CurConf"
 0x00fe0000-0x01000000 : "FIS directory"
 SL2312 MTD Driver Init Success ......
 FTC_FOTG2XX : Init FOTG2XX Driver
 Init FOTG2xx driver 
 FTC_FOTG2XX : >>> Found FOTG2XX ...
 pFTC_OTG c1778120
 FTC_FOTG2XX_1 : Init FOTG2XX Driver
 Init FOTG2xx driver 
 FTC_FOTG2XX_1 : >>> Found FOTG2XX ...
 pFTC_OTG_1 c17781e0
 hcd->self.controller c726f000
 hcd end
 hcd_buffer_create
 ehci-hcd-FOTG2XX ehci-hcd-FOTG2XX: new USB bus registered, assigned bus number 1
 usb_register_bus
 ghcd_FOTG2XX hcd c726f000
 hcd_irq_For_OTG
 ehci->caps->length 10, hcd->regs f6800000 , ehci->regs f6800010 
 udev->state 1 
 drivers/usb/host/ehci-hcd-FOTG2XX.c: USB support enabled, EHCI rev 101. 0
 Timing on EOF1(0xf6800040) = 0xd
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 FTC_FOTG2XX : >>> +FOTG2XX_get_otg_transceiver
 FTC_FOTG2XX : registered host c726f000
 OTG2XX act as HOST only (don't need to wait gadget driver)
 +(OTGC_Init)
 pFTC_OTG->otg.default_a=1 
 +(OTGC_Init)
 pFTC_OTG->otg.default_a=1 
 OTG_enable_VBUS 
 FTC_FOTG2XX : >>> Drive VBUS ok...
 +OTGP_Close()
 OTG2XX act as HOST only (remove gadget function)
 +OTGH_Open()(0x30=0x0)
 OTG_enable_VBUS 
 mdwOTGC_Control_A_VBUS_VLD_Rd 80000
 +OTGP_Close()
 OTG2XX act as HOST only (remove gadget function)
 +OTGH_Open()(0x30=0x0)
 ehci otg_set_host status 0 
 connect_change 1 
 clear_bit 
 return set_bit
 hcd->self.controller c0607c00
 hcd end
 hcd_buffer_create
 ehci-hcd-FOTG2XX-1 ehci-hcd-FOTG2XX-1: new USB bus registered, assigned bus number 2
 usb_register_bus
 ghcd_FOTG2XX_1 hcd c0607c00
 hcd_irq_For_OTG_1
 ehci->caps->length 10, hcd->regs f6900000 , ehci->regs f6900010 
 udev->state 1 
 drivers/usb/host/ehci-hcd-FOTG2XX-1.c: USB support enabled, EHCI rev 101. 0
 Timing on EOF1(0xf6900040) = 0xd
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 FTC_FOTG2XX_1 : >>> +FOTG2XX_get_otg_transceiver_1
 FTC_FOTG2XX_1 : registered host c0607c00
 OTG2XX act as HOST only (don't need to wait gadget driver)
 +(OTGC_Init_1)
 pFTC_OTG_1->otg.default_a=1 
 +(OTGC_Init_1)
 pFTC_OTG_1->otg.default_a=1 
 OTG_enable_VBUS 
 FTC_FOTG2XX_1 : >>> Drive VBUS ok...
 +OTGP_Close_1()
 OTG2XX act as HOST only (remove gadget function)
 +OTGH_Open_1()(0x30=0x0)
 OTG_enable_VBUS 
 mdwOTGC_Control_A_VBUS_VLD_Rd 80000
 +OTGP_Close_1()
 OTG2XX act as HOST only (remove gadget function)
 +OTGH_Open_1()(0x30=0x0)
 ehci otg_set_host status 0 
 connect_change 1 
 clear_bit 
 return set_bit
 usbcore: registered new driver usblp
 drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 Initializing USB Mass Storage driver...
 usbcore: registered new driver usb-storage
 USB Mass Storage support registered.
 md: linear personality registered as nr 1
 md: raid0 personality registered as nr 2
 md: raid1 personality registered as nr 3
 md: raid10 personality registered as nr 9
 md: raid5 personality registered as nr 4
 raid5: measuring checksumming speed
    gemini xor acceleration:    48.000 MB/sec
 raid5: using function: gemini xor acceleration (48.000 MB/sec)
 md: multipath personality registered as nr 7
 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
 md: bitmap version 4.39
 ipsec_init : cryptographic accelerator 
 ipsec tx_desc = ffc17000
 ipsec rx_desc = ffc18000
 ipsec tx_desc_dma = 0060f000
 ipsec rx_desc_dma = 016a8000
 NET: Registered protocol family 2
 IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
 TCP reno registered
 TCP bic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 RAMDISK: Compressed image found at block 0
 VFS: Mounted root (ext2 filesystem).
 Freeing init memory: 104K
 Using /etc/lcd_module/lcd_driver.ko
 LCD: char device registered
 LCD: char device added
 reg_val 82c220b7 
 pLCD_Access c0013000
 LCD: init OK, iobase: 0xf4400000, rows: 2, columns: 16
 Trying to free nonexistent resource <f4400000-f4400002>
 LCD: deleting char device 125829120
 Using /etc/lcd_module/lcd_driver.ko
 LCD: char device registered
 LCD: char device added
 reg_val 82c220b7 
 pLCD_Access c0013000
 LCD: init OK, iobase: 0xf4400000, rows: 2, columns: 16
 Mounting proc filesystem...
 2.6.15
 Mounting tmpfs to copy file from flash...
 2.6.15
 HardDiskBootUp=NO
 Boot up from flash
 Checking and Mounting filesystem(s) ...
 Copy hddapp.bz2 from flash to Ramdisk...
 12288+0 records in
 12288+0 records out
 insmod /lib/modules/fuse.ko
 Using /lib/modules/fuse.ko
 fuse init (API version 7.8)
 fuse distribution version: 2.6.3
 2.6.15
 2.6.15
 2.6.15
 SkinnyNAS found, mount /system
 EXT3-fs: unable to read superblock
 EXT2-fs: unable to read superblock
 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
 FAT: unable to read boot sector
 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
 FAT: unable to read boot sector
 isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32
 NTFS-fs error (device md0): read_ntfs_boot_sector(): Unable to read primary boot sector.
 NTFS-fs error (device md0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
 NTFS-fs error (device md0): ntfs_fill_super(): Not an NTFS volume.
 XFS: SB read failed
 mount: Mounting /dev/md0 on /system failed: Invalid argument
 SkinnyNAS found, mount /system
 mount: Mounting /dev/hda1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/hdb1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/hdc1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/hdd1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/sda1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/sdb1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/sdc1 on /system failed: No such device or address
 SkinnyNAS found, mount /system
 mount: Mounting /dev/sdd1 on /system failed: No such device or address
 mounted device=
 2.6.15
 Umount tmpfs...
 GMAC-0 Addr 1 Vendor ID: 0x01410cc2
 mii_write: phy_addr=0x1 reg_addr=0x4 value=0x5e1 
 mii_write: phy_addr=0x1 reg_addr=0x9 value=0x300 
 mii_write: phy_addr=0x1 reg_addr=0x18 value=0x41 
 mii_write: phy_addr=0x1 reg_addr=0x0 value=0x9200 
 mii_write: phy_addr=0x1 reg_addr=0x0 value=0x1200 
 Link Up (0x796d) MII REG 10 = 0x0
 MII REG 5 (bit 5:15) = 0x4
  100M/Half
 Flow Control Disable.
 Storlink eth0 address = 7AB4F70000CB
 Disable MAC Flow Control...
 Starting syslogd...
 Starting inetd...
 Starting crond...
 Mon Jan  1 12:00:00 CST 2007
 Running constructor /usr/sausalito/constructor/00_construct_start
 Running constructor /usr/sausalito/constructor/01_construct_network
 Running constructor /usr/sausalito/constructor/02_construct_autoip
 Running constructor /usr/sausalito/constructor/09_construct_time
 Running constructor /usr/sausalito/constructor/10_construct_dhcp
 Running constructor /usr/sausalito/constructor/12_construct_syslog
 Running constructor /usr/sausalito/constructor/20_construct_disk
 Running constructor /usr/sausalito/constructor/20_construct_sata_disk
 Running constructor /usr/sausalito/constructor/20_construct_usb_disk
 Running constructor /usr/sausalito/constructor/21_construct_disk_crypt
 Running constructor /usr/sausalito/constructor/21_construct_raid
 Running constructor /usr/sausalito/constructor/25_construct_admin
 Running constructor /usr/sausalito/constructor/26_construct_grp_passwd
 Running constructor /usr/sausalito/constructor/27_construct_group
 Running constructor /usr/sausalito/constructor/30_construct_guest
 Running constructor /usr/sausalito/constructor/50_construct_telnet
 Running constructor /usr/sausalito/constructor/90_construct_errorNotification
 Running constructor /usr/sausalito/constructor/91_construct_bonjour
 Running constructor /usr/sausalito/constructor/95_construct_upnp
 Running constructor /usr/sausalito/constructor/99_construct_stop
 Done
 Local package initialization:start syslogd
 syslogd: Already running.
 start crond
 start thttpd
 GetUDN: rand=60f6edae GetInterfaceName: ethernet interface name=eth0 GetUDN: UDN=60f6edae-L121-7607-70aa-7ab4f700cb GetInterfaceName: ethernet  interface name=eth0 ifname=eth0 GetIPaddr: IP address=192.168.1.200 main: HTTP_buf=http://192.168.1.200:80 Linux 
 UPnPCreateMicroStack: UUID=uuid:60f6edae-L121-7607-70aa-7ab4f700cb UPnPCreateMicroStack: Serial Number=0000001 UPnPCreateMicroStack: UPnP.xml...    
 <?xml version="1.0" encoding="utf-8"?>
 <root xmlns="urn:schemas-upnp-org:device-1-0">
 <specVersion>
 <major>1</major>
 <minor>0</minor>
 </specVersion>
 <device>
 <deviceType>urn:schemas-upnp-org:device:Sample:1</deviceType>
 <presentationURL>%s</presentationURL>
 <friendlyName>GIGABIT-NAS</friendlyName>
 <manufacturer>Storage</manufacturer>
 <manufacturerURL>http://www.syncquick.com</manufacturerURL>
 <modelDescription>Storage</modelDescription>
 <modelName>GIGABIT-NAS</modelName>
 <modelNumber>QUAD-HDD-NAS</modelNumber>
 <serialNumber>%s</serialNumber>
 <UDN>uuid:%s</UDN>
 <serviceList>
 <service>
 <serviceType>urn:schemas-upnp-org:service:GIGABIT-NAS:1</serviceType>
 <serviceId>urn:upnp-org:serviceId:GIGABIT-NAS1</serviceId>
 <SCPDURL>GIGABIT-NASService/scpd.xml</SCPDURL>
 <controlURL>GIGABIT-NASService/control</controlURL>
 <eventSubURL>GIGABIT-NASService/event</eventSubURL>
 </service>
 </serviceList>
 </device>
 </root>
  UPnPCreateMicroStack: DeviceDescription=<?xml version="1.0" encoding="utf-8"?>
 <root xmlns="urn:schemas-upnp-org:device-1-0">
 <specVersion>
 <major>1</major>
 <minor>0</minor>
 </specVersion>
 <device>
 <deviceType>urn:schemas-upnp-org:device:Sample:1</deviceType>
 <presentationURL>http://192.168.1.200:80</presentationURL>
 <friendlyName>GIGABIT-NAS</friendlyName>
 <manufacturer>Storage</manufacturer>
 <manufacturerURL>http://www.syncquick.com</manufacturerURL>
 <modelDescription>Storage</modelDescription>
 <modelName>GIGABIT-NAS</modelName>
 <modelNumber>QUAD-HDD-NAS</modelNumber>
 <serialNumber>0000001</serialNumber>
 <serviceList>
 <service>
 <serviceType>urn:schemas-upnp-org:service:GIGABIT-NAS:1</serviceType>
 <serviceId>urn:upnp-org:serviceId:GIGABIT-NAS1</serviceId>
 <SCPDURL>GIGABIT-NASService/scpd.xml</SCPDURL>
 <controlURL>GIGABIT-NASService/control</controlURL>
 <eventSubURL>GIGABIT-NASService/event</eventSubURL>
 </service>
 </serviceList>
 </device>
 </root>
  Intel MicroStack 1.0   link jpg done.
 unlink xml done.
 PING time.nist.gov (192.43.244.18): 56 data bytes
 64 bytes from 192.43.244.18: icmp_seq=0 ttl=49 time=140.0 ms
   --- time.nist.gov ping statistics ---
 1 packets transmitted, 1 packets received, 0% packet loss
 round-trip min/avg/max = 140.0/140.0/140.0 ms
 Looking for host time.nist.gov and service 123
 host found : time.nist.gov
  8 Jan 08:47:13 ntpdate[1309]: step time server 192.43.244.18 offset 63751617.180650 sec
 192.168.1.200  
 Thu Jan  8 08:47:13 CST 2009
 Trying to free nonexistent resource <f4400000-f4400002>
 LCD: deleting char device 125829120
 Using /etc/lcd_module/lcd_driver.ko
 LCD: char device registered
 LCD: char device added
 reg_val 82c220b7 
 pLCD_Access c0013000
 LCD: init OK, iobase: 0xf4400000, rows: 2, columns: 16
    GIGABIT-NAS login: root
    Password: 
 
 BusyBox v1.00-rc3 (2008.10.29-07:05+0000) Built-in shell (ash)
 Enter 'help' for a list of built-in commands.
 GIGABIT-NAS>

Pages in category "35HD-QUAD-NAS"

The following 3 pages are in this category, out of 3 total.