Category:35HD-DUALIDE-NAS

From MRT Wiki

Flash layout

dev:    size   erasesize  name
mtd0: 00020000 00010000 "RedBoot"
mtd1: 00180000 00010000 "Kernel"
mtd2: 00200000 00010000 "Ramdisk"
mtd3: 00420000 00010000 "Application"
mtd4: 00010000 00010000 "VCTL"
mtd5: 00020000 00010000 "CurConf"
mtd6: 00010000 00010000 "FIS directory"

Pictures

PCB pictures

Bootloader log

Link Down
Link Up (0000)
Storlink EMAC address = 0050c22bd000
Ethernet eth0: MAC address 00:50:c2:2b:d0:00IP: 192.168.2.71, Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Storlink release, version S000.9018 - built 17:22:11, Jul 15 2005

Platform: Storlink Sword (ARM9) 
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

Use Internal PCI Clock 
Processor: SL3316a3
IDE0 Enable       
AHB Bus Clock:116MHz    Ratio:3/2
RAM: 0x00000000-0x04000000, 0x00049250-0x03fef000 available
FLASH: 0x70000000 - 0x70800000, 135 blocks of 0x00010000 bytes each.
==> enter ^C to abort booting within 3 seconds ...... 

Linux boot log

Linux version 2.6.10_dev-versatile926ejs (root@localhost.localdomain) (gcc version 3.4.4) #39 Mon Oct 29 18:22:47 CST 2007
CPU: FA52Xid(wb) [66015261] revision 1 (ARMv4)
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
CPU0: D cache: 4096 bytes, associativity 2, 16 byte lines, 128 sets
Machine: Sword sl2312
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw console=ttySL0,19200 initrd=0x0800000,16M
PID hash table entries: 512 (order: 9, 8192 bytes)
Bus: 116MHz(3/2)
Console: colour dummy device 80x30
sl2312 console setup : 
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 45184KB available (2370K code, 758K data, 100K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
checking if image is initramfs...desched thread 0 started up.
it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 16384K
NET: Registered protocol family 16
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
sl2312 Gpio init
GPIO initial OK
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/O].
Initializing Cryptographic API
ipsec_init : cryptographic accelerator 
ipsec tx_desc = ffc00000
ipsec rx_desc = ffc01000
ipsec tx_desc_dma = 017a2000
ipsec rx_desc_dma = 017a3000
Real Time Clock Driver v0.10
Storlink Power Control Initialization
ttySL0 at MMIO 0x22000000 (irq = 6) is a SL2312
io scheduler noop registered
RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize
emac_init_module:EMAC initialized for A3 Chip !
Support NAPI Driver.
eth0: Dropping NETIF_F_SG since no checksum feature.
Configure VID 1
Support NAPI Driver.
eth1: Dropping NETIF_F_SG since no checksum feature.
Configure VID 2
Get ADM identifier ffffffff
ADM699X not Found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide 0: physical = 52000000, virtual = c480e000, irq = 2
    ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
ide 1: physical = 52800000, virtual = c4810000, irq = 3
    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
SL2312 MTD Driver Init.......
SL2312 MTD Driver Init Success ......
sl2312-ohci sl2312-ohci: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   arm4regs  :    30.000 MB/sec
   8regs     :    33.200 MB/sec
   32regs    :    34.400 MB/sec
raid5: using function: 32regs (34.400 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 100K
init started: BusyBox v1.5.0 (2007-04-30 20:06:23) multi-call binary
starting pid 733, tty : '/etc/rc'
Mounting proc filesystem...
Mounting sys filesystem...
Mounting devpts filesystem...
Mounting usbfs filesystem...
Mounting tmpfs to copy file from flash...
HardDiskBootUp=NO
Boot up from flash
Checking and Mounting filesystem(s) ...
Copy hddapp.bz2 from flash to Ramdisk...
8448+0 records in
8448+0 records out

PCB Images

PCB top
PCB bottom
Fan Regulator

Manual

Manaul PDF

This category currently contains no articles or media.